OLAN DEEMS

Method Statement for Total Traceability of Oxygen Piping Materials

<div style="text-align: justify;">
This procedure is intended to provide guidance and establish controls to ensure total traceability of oxygen piping components back to the Manufacturer’s Mill Certificate / Certificate of Conformity, thus ensuring correct materials are installed. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
<b><span style="font-size: large;">A. Storage & Handling :</span></b></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Piping components for oxygen piping systems shall be stored, protected and issued in accordance with OWNER Specification.<br />
<br />
<center>
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="6258738437" style="display: block; text-align: center;"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=WV7V6W4G4YKQS" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="1600" data-original-width="1072" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiiUcV6yXsbG6y2xC7fUSANfCvooA7YlZ9QlQsmCQi-taTHvYCCEaWuYHW3vk_4kcSmoQ2vVCH3LPBPBVwM1hP7YHK1sIJr-6nHbmRXbsavK3JHFg2gSJahq2SNAzEWgRE9V9FW_V02zs0/s400/Architecture+%2528212%2529.jpg" width="267" /></a></div>
<b><span style="font-size: large;">B. Fabrication & Installation:</span></b></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Upon receipt, piping components shall be checked for identification in accordance with Owner's Specification.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• For piping components which require total traceability the OWNER unique number must be die stamped or vibro etched on each component.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Prior to issue of any piping components, the Stores Controller and Piping Supervisor / Foreman must confirm that each component is clearly identified with the OWNER unique number which enables traceability back to manufacturer’s mill certificate/certificate of conformity.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Immediately upon issue of piping components the Piping Supervisor shall record all unique numbers against the relevant items on the approved isometric drawings.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Transfer of identification markings prior to cutting shall be in accordance with Owner's Specification.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
<b><span style="font-size: large;">C. Fabrication & Installation:</span></b></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• At the weld fit-up stage and prior to welding, the Q.C. Inspector shall confirm that each component of the weld joint is clearly identified with a OWNER unique number. This number shall be recorded on the weld fit-up / visual inspection report. The unique number shall be confirmed by both OWNER Q.C. representatives who shall endorse the inspection report.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Upon visual acceptance of a particular weld, the details of the piping components unique numbers shall be entered into the News Data Base.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• The News Data Base, which has already been loaded with all relevant data regarding item code numbers/unique numbers automatically checks the data entered against material traceability standard tables. Any non-compliance shall then be identified.</div>
<div style="text-align: justify;">
<br /></div>
<br />
<b>Would you like to take the full version, including its native file <i>(word & pdf file)</i>, of the Method Statement for Total Traceability of Oxygen Piping Materials Template? Simply click the "<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=WV7V6W4G4YKQS" target="_blank">DOWNLOAD NOW</a>" below;</b><br />
<b><br /></b>
<br />
<center>
<table border="1" style="height: 100%px; width: 500px;">
<tbody>
<tr>
<td><img alt="MsWord" src="https://goo.gl/BDuiD8" /><br />
<img alt="PDF" src="https://goo.gl/HMMBbo" />
</td>
<td><form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_top">
<input name="cmd" type="hidden" value="_s-xclick" />
<input name="hosted_button_id" type="hidden" value="WV7V6W4G4YKQS" />
<input alt="PayPal - The safer, easier way to pay online!" border="0" name="submit" src="https://goo.gl/7LtpjA" type="image" />
<img alt="" border="0" height="1" src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width="1" />
</form>
</td>
</tr>
</tbody>
</table>
</center>
<br />
<center>
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="6258738437" style="display: block; text-align: center;"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://bccd7dov20t9nlfaogj6pmyftn.hop.clickbank.net/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="443" data-original-width="600" height="471" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhusbAJ9moHcMg_9eiwg7G1C5ROkN8ObHYOsGYXtcTIguxY95UhLoaxA7c_ynRmEpoDn7HTfxXupUjhh5Bkho8BGxEk1CoXQsAthjjn4NJl3BzKXwu2AMFHoIsxBO-Gta3ZQTqz-nEonHo/s640/Project+Management+%2526+Business+Templates.png" width="640" /></a></div>

Method Statement for Total Traceability of Oxygen Piping Materials

This procedure is intended to provide guidance and establish controls to ensure total traceability of oxygen piping components back to the ...

6:17 PM

A Worth While Walk at Changdeokgung (창덕궁) Palace

<div style="text-align: justify;">
The essence of staying in Korea is knowing the root, <i>traditions and culture, </i>of Koreans.  </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
For short period, our head office has been located in Jongno District (Jongno-gu) located in central Seoul, South Korea. I heard that its name derived from a major local street (<i>Jongno)</i> which means "<i>Bell Street</i>". So, I had a chance to visit the "<i>Changdeokgung Palace</i>".</div>
<div style="text-align: justify;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgx_LtPI8nHF5agFL6eXLSAVg2zSJj6eEizZ5iwEyoVafKJ9HbrkV4-eqQUpo7_BD-8nU5gUlTwdK2IxiP_7E5f04ybcdBtA6Ogc36apkQRpSZ5v7cyNAf0IdT7JKB298xJmsqlZ8clJm8/s640/Changdeokgung+Palace+%25283%2529.jpg" width="640" /></a></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
Changdeokgung (창덕궁) Palace or Changdeok Palace is located within a large park in Jongno-gu, Seoul, South Korea. It's a 10 minutes walk from Ankook Subway station (<i>Line #3</i>). The palace's buildings of Changdeokgung blend with the natural topography because it was built between Peak Maebong of Mt. Bugaksan in the back and River Geumcheon. </div>
<div style="text-align: justify;">
<br /></div>
<center>
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="6258738437" style="display: block; text-align: center;"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhxqkiKiI91uJ0-MUAv0YBcsr4wP5Dv7tHwtxiiEjQxveAdcE9vT14JUFIfWhh2ua5Rk-mg2hhfeIzbl4wNDyW0IyReCRXzQPeFwpzPDdT3J_GzAwKgjsdQ15zSFznIjcGxM69_xOvZmEg/s640/Changdeokgung+Palace+%25285%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhZQsjgEzk1gwy3MPl3TXXeiyol1u_T52xwGrb0YrfCiIPa53S5p3kLEXoGkUOGHfT0sHaRCxX8U0mezVzOV5lqqqqQWJFy-V2HuiLlEY1AtXshl2UYhVaBP_B7WAhfyhYrJhwBPBFRGjk/s640/Changdeokgung+Palace+%25289%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="106" data-original-width="284" height="238" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhaabqznG2coTMjLNY14CfE9G7EhS3pBirCH5WjLk_ebhTiDSwaxhDr3NYpBHmvNjtJYUaggAguh0LzU80k9fmazdsAvcB8rISm4e5dRrwvW43TIHknNKeEW1ypu1SukoB5ncTOPYCfqQI/s640/ComFare+Logo+F2+%2528ComFare.OlanDeems.com%2529.png" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj1feXzuxJNnpbpOCZJHUa0ytpzOEQ9KB7tLHcVSe1CNgd-fY3fbheADSChxncs1ilcUHNQPemz3MzATCCMDU581zxMLYWjH0QqH8jwbiLIxvkbzjFjpjLFSfT5luFC8viotmEKTOENWs8/s640/Changdeokgung+Palace+%252810%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhW-7L63Y2bILu_-bngppF92hCNDfVGDjWy7QKNSpx9cL292lvg2uq5p89CMLfQYfFvuVAHLMsDymd7jxwKQhaO7PsFKyRxS_A2p0bgHCGZnKjVrovi-pFXa8IsDO22GX2mnyKTC3_6ZKU/s640/Changdeokgung+Palace+%252811%2529.jpg" width="640" /></a></div>
<div style="text-align: justify;">
<br /></div>
<center>
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="6258738437" style="display: block; text-align: center;"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<div style="text-align: justify;">
It's once in a life time experience to see the old architectural building features and imagining on how the Royal Family of Koreans lived behind the palace walls. So, if you're inside and you must stroll around in all the buildings and rooms and see those unique and beautiful Korean garden design.</div>
<div style="text-align: justify;">
<div>
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgiarzL-i8viJuCYn4CEiknfTo5swSLQViRHX6r4O2HAdjr9_w22jo7pgxNVqu7PZtockLldndfCuZjqK2PzEcTpitkubMfaPpyRMI6HTcvn0U6emEUthgsUu0KRKs2SWBh1xdNj9IEUFA/s640/Changdeokgung+Palace+%252814%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj8TYW03EzIisBfU0nJAFm6rd7xJMuq2aqD42sJ94gyuugoiqMJfrA64iT31RIuGlNqyKPkD5IV03UT8DB0D890z9aToOfiZXTIePRjMZ5axFkDtI-hwxMvP4b88LyG7J3HARfZLKaGtAw/s640/Changdeokgung+Palace+%252815%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="113" data-original-width="264" height="170" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgQDduu-Lci8blAmD7QFFu_-SY7nDUub4vTZN4GhZphq2gmpplwqUhpedNWLnmS6JLtiHqnIGfgSeZlw-3uFwLKVw4kuz-sqtgDFR7Z81-w6k8I1bdS6MsotUxJVWRn5an8MU6Nr8Vva6o/s400/BestFly+Logo+%2528Fly.OlanDeems.com%2529.png" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiHKTjAboP34EEZUejOORDGShduDqe7aWvMFP9wX3mbSVbJhuZxQKYdelhttqhG3fkmEHcMufHwGH-Lb6Nf3svcnq2SBwbj-mceMe_16cD3ei5lb3uOrdKHzYHGKyLBMzihC0vm4FS9kO8/s640/Changdeokgung+Palace+%252816%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEibMNYGisqgXvTcRiBgNKs7C56-GeM5eeyHUQtFZyvr2uetc1oieEIuABfXI2bmWAOz_sUAS_YRUqJYkS9Uh6ZBp4hEpPoyN2eRHN4ktaicbEjpuM6-tp-gN0oj9_NDBKG-dMkBrorolYE/s640/Changdeokgung+Palace+%252823%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1600" data-original-width="1200" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhqWgA2NtNbNPMgDfMWAP80kanUbUXBMHvU0OeYW2UONjWUpOWqLPKIdHoZJgPak4Xck6UE5mEH__sDA12qXZW__rQobkkezjutbFBMKrJ1rIwrCSWVKM7yRypSeNBdJFq9LB0pnVZDNMk/s640/Changdeokgung+Palace+%252834%2529.jpg" width="480" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiuur1RIlzcvHmIkZ59EUtwHgSO-LthGobPJ626TMzinaQ0pjSw2KUcOWzjqPH8tK-rZv69rLL7u1V3V0rTUWNaCzuM_hN41Cpo98gfDLauLpH2ID8j28IgRXtegTORVI-j__XttleUA5I/s640/Changdeokgung+Palace+%252837%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjDMA4WnFHAgEugooGiBoKppBldg8HnXQOaRC4XQIcxA6wsngo9YsrYUo52_JXfztuMgdLJATrRS3DcwyLAMI3gJ9kLbMPojwxwZCGkYbbTcm_Ks42bpAKLkusrFxMhHi_q3BWe7OTLsWo/s640/Changdeokgung+Palace+%252840%2529.jpg" width="640" /></a></div>
<div>
<br /></div>
<div>
I would recommend visiting this palace. It's open from 10am to 6pm. It would be worth it, a kid friendly destination. It's a lovely palace to walk around seeing a lot of things... a very well-preserved palace with beautiful gardens.</div>
<div>
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhB1-EjXkr5tH2OKvevQXkmKDs81xoDiixV1SbwY7j0eIc_AiGUjuei3ggdsBVn7C__JjVzwxFvIxPUXJpEFFQ1mshTcXKL2eMwtLQea1az26bFzaRrHscnH9v0A7gXT9C9lER0Sn_DCJE/s640/Changdeokgung+Palace+%25282%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEijE72BPnMbyjoaCZb1c3c6cqy9p7WsFqoUCTLxld_qDhh2wmdlvzwOYOVtjo62Ngbl3MknXlhlv0BzwTE624Kt1Yc0Ih3R1bhnVx2EJ5MvKqMJrsGgv_dP0BZh_LRGgQQUowjxOyMNWqI/s640/Changdeokgung+Palace+%25284%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="288" data-original-width="792" height="145" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhMnd7CCdLD8Q631jbnP0T-Nrd7jWgzeeCN6M_ei1ObjW6UsyKxfwIZlIXybPjvRhEyOs54bVnoIc76jyUb9NkzASFm2q7jbNRahjij6oCdx_r2eJ7lqnMDLqd_QNc7m48QMTQaooL5pkI/s400/ComFare+Logo+%2528ComFare.OlanDeems.com%2529.png" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjm61oU8E_fHruTMjxBlaJNx6e4itcfNJPg7rJtYJBvYRwjzC70QVznLkV6E23OYOSeTWfrUTnbPaZ59wmCeSVUa-Bg5YD4-8Ai271m9_UMMmQ3rfJLkT3CCZl36sAo6RXq9nZsmXTX1UY/s640/Changdeokgung+Palace+%252843%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjfZ394h9gft8kAl-DbytSHuXkoVfNeaqtZ-eVEaF7tEBsiIV4wwxfOXTzOf47PnESoqnmNytonm0lkFhf-MVq-NmgGapM-3Cz9xDIn4pb2No_ZUotYmu-HqWO4PivXcTic-z8GHGOZvOk/s640/Changdeokgung+Palace+%252844%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiuKpuWNXRDC3zgDkl_jzYKhTKa_57bmOEX3zkyXweeIH9WRMAV107HYk2gdd7pMIRrVGAzu2Y_mHIzAvKXAUw8ab7N612j1fyiUZO20KNxOyKyEwALWSet8ANB27t8P5gdh9jKfVfcIcI/s640/Changdeokgung+Palace+%252845%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhT_JKKDk1nkF9ym-jwcY1SAM1KrOQmfbty9lih6QdsAU2X12gxLqsciawTf7r6Hd3RVrOgkeGOnfpcMRr3pBwRRkT_WdsLc6dGZ6m9x9i5w9SQRBdvsIAV0AYhRu80oCszd1ASdmrF0vk/s640/Changdeokgung+Palace+%252848%2529.jpg" width="640" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://comfare.olandeems.com/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg0mbSf6n8xSwQtDBAxhXV6OrbxjlcUiWa-wzGdN3FrCkcoZMOM9CHFrImUV8TPoAiybMsf5AIAxZDIkvaXLpq38gSJwinMVY3HmvU2dpnJqrjnN4ofFiCkAuLxFaL8gRMhv-gDhfcehPY/s640/Changdeokgung+Palace+%252849%2529.jpg" width="640" /></a></div>
<div>
<br /></div>
</div>
<center>
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="6258738437" style="display: block; text-align: center;"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://8d3a2fmy00u6wp8z48xao91d27.hop.clickbank.net/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="274" data-original-width="256" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiNsDlIVwR5Acx_Br_8ChLEbWQEK4_YwRIO8b0QhN56ULMGf9pu657rZJtaajo62qbUCK_JoFNqjDCEpYbBF6CT_CllDN6wNS4IPkZucz5VHTrZCm-OI1yN1sGfellvutX8i-OmEia87B8/s400/BuildaContainerHome.jpg" width="373" /></a></div>
<br />

A Worth While Walk at Changdeokgung (창덕궁) Palace

The essence of staying in Korea is knowing the root, traditions and culture, of Koreans. For short period, our head office has been ...

1:10 AM

Method Statement fo Equipment Internal Trays Installation Work

<div style="text-align: justify;">
This Method Statement highlights the OWNER work sequence for the assembly and installation of trays, which are to be installed on the [Project Title] Project in [Location]. This Method Statement is applicable to all equipment requiring loading of internals. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
The procedure is intended to provide general application guidance and establish controls during preparation and execution and to ensure that the loading of equipment internals referred to as trays is carried out safely, and in accordance with good working practice, as per OWNER Specifications and Vendors’ Instruction Manuals.<br />
<br /></div>
<div style="text-align: justify;">
<div class="separator" style="clear: both; text-align: center;">
<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=MC4VMYVA73UFS" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1068" data-original-width="1600" height="425" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhZyAxBWbWDWc-qwwIm6mKNKDNFvsVCrOemWYMyygAdkee5Fid8Az9_dfP6A11Ne_ZrdUenaZxnkmwcdEOmOI4CnA9GdLUiSO1x1pL_BMy6JCMJZYjOn6Bhov64oY4kt1pcXgpQnaLD1Gs/s640/Architecture+%2528198%2529.jpg" width="640" /></a></div>
<br /></div>
<div style="text-align: justify;">
<b><span style="font-size: large;">Pre-Installation Activities for Equipment Internal Trays</span></b></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Prior to commencement of the work, ensure that erection personnel have read and understand instructions, Method Statements, Job Specifications and are familiar with tray assembly drawings. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Ensure that the erection personnel have undergone training and are certified by OWNER for confined space entry work prior to execution of the work.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Conduct site survey to properly assess the physical condition of the confined work place and appropriately address the necessary precautions and requirements, such as lighting and air ventilators inside the column, if manholes are open and if blinds for column piping are installed.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Co-ordinates properly with OWNER Representative for confirmation that the column is in gas free condition prior to entry inside the column.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Ensure to install low voltage lighting inside the equipment and provide sufficient number of ventilators (air blower / exhauster) on open manholes, to establish air flow inside the column. Air compressor will be used to run the air ventilator.       </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Ensure to double-check the equipment internals such as tray panels, fasteners, main beam, cover plates and support rings as per IFC Assembly and Installation drawings as provided by OWNER. Each tray part is marked with its reference number, any deviation against the issued drawings during checking / sorting shall be immediately reported to OWNER for their information and appropriate action.  </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Ensure to erect, where required, necessary scaffolding / access platform located at each exit and entry manway for mechanical fitters prior to tray installation. Erected scaffold shall be in accordance with SUBCON Working Instructions.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Prior to tray assembly and installation, ensure to locate the reference point inside the column, and that the rust preventive on the tray materials has been removed and washed clean by suitable solvent such as Acetone. For stainless steel trays, the solvent should contain less than 50 ppm leachable chlorides. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Ensure that “Work Permit and Entry Permit” to enter Confined Space have been secured and the standby man at manhole entrance is posted prior to commencement of the work. </div>
<div style="text-align: justify;">
<br /></div>
<center>
<script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle"
     style="display:block; text-align:center;"
     data-ad-layout="in-article"
     data-ad-format="fluid"
     data-ad-client="ca-pub-8410740005525312"
     data-ad-slot="6258738437"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<div style="text-align: justify;">
<span style="font-size: large;"><b>Procedures:</b></span></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• The assembly and installation of equipment internals (trays) shall be carried out in strict adherence with OWNER furnished approved for Construction drawings, specifications, and Vendors’ Instruction Manuals.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Vessel internal visual check shall be carried out before start of internal work.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• A 250-ton crane with sufficient boom length to reach above manway shall be used for external handling of heavy trays, support rings and other column accessories. Small tray items will be raised or lowered at various manway levels using pulleys and continuous long ropes.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• For internal handling of heavy column trays / parts, an electric hoist or air tugger will be used. This will be positioned at each working platform inside the column.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Cleaning of all materials should be carried out before installation, if dirty.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Conduct pre-assembly of the tray / tray panel on the ground adjacent to the column. Do not fix them together, but put the tray panels loosely together. Clamps and/or bolts should be fastened by hand only, in order to be able to adjust position of the tray during actual installation.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Wherever possible, assemble two trays in such a way that one tray or tray part is pre-assembled on the ground while the other part is being installed on the column, thus permitting sequential and gradual progression of the installation.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• As soon as one tray is assembled, installation sequence of equipment internals will start at the bottom of the column, working up towards the top. For detailed tray installation procedures, seal welding, level adjustment and tolerances, refer to attached Sulzer Chemtech AG Technology and Koch-Glitsch Italia, Vendors’ Instruction Manuals. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• For C-2115 Wash Tower, initially two-(2) crews shall be assigned for the assembly and installation of internal. Additional manpower will be employed as required. Since two-(2) crews shall be working simultaneously per shift at different levels, a safety net shall be provided above each manway to protect craftsmen working below from falling objects.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Installed tray internals on each completed level shall be inspected to ensure that:</div>
<div style="text-align: justify;">
</div>
<ul>
<li>Orientation and measurements are correct.</li>
<li>Check tightness of 10% of the bolted connection.</li>
<li>Evenness of the tray decks should not deflect due to work during installation.</li>
<li>Levelness of tray floors shall be checked using a manometer (refer to Fig.1 sheet 5 of 12 Koch-Glitsch Italia, Vendors’ Instruction Manuals.)</li>
<li>All parts are fitted properly and no loose hardware is left which may have adverse effect on the tray performance.</li>
</ul>
<span style="text-align: justify;">• Inspection shall be conducted by SUBCON, OWNER and PMT inspectors during the progress of the work, from bottom to top, and in accordance with approved QCIP inspection requirements and specification. OWNER inspector shall also make the final check and inspection prior to final acceptance / closing of manway.</span><br />
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• All dirt, debris, grease, tools and equipment shall be completely removed after work is completed and prior to final visual inspection / acceptance.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• This same methodology shall be applied to all equipment that requires assembly and installation of trays until all the trays of equipment have been installed. </div>
<div style="text-align: justify;">
<br /></div>
<b>Would you like to take the full version, including its native file </b>(word & pdf file)<b>, of the Method Statement fo Equipment Internal Trays Installation Work Template? Simply click the "</b><a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=MC4VMYVA73UFS" style="font-weight: bold;" target="_blank">DOWNLOAD NOW</a><b>" below;</b><br />
<b><br /></b>
<br />
<center>
<table border="1" style="height: 100%px; width: 500px;">
<tbody>
<tr>
<td><img alt="MsWord" src="https://goo.gl/BDuiD8" /><br />
<img alt="PDF" src="https://goo.gl/HMMBbo" />
</td>
<td><form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_top">
<input name="cmd" type="hidden" value="_s-xclick" />
<input name="hosted_button_id" type="hidden" value="MC4VMYVA73UFS" />
<input alt="PayPal - The safer, easier way to pay online!" border="0" name="submit" src="https://goo.gl/J4Xj4i" type="image" />
<img alt="" border="0" height="1" src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width="1" />
</form>
</td>
</tr>
</tbody>
</table>
</center>
<br />
<center>
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="6258738437" style="display: block; text-align: center;"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://8dabdlq3oan8ul1ggbzfygt4fv.hop.clickbank.net/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1600" data-original-width="1258" height="450" src="https://lh3.googleusercontent.com/miGcCL7Fk4U6LOga1iJoXII9gjYNkPRQpsqhAoDV845AS-7gcYkVwLBCmknwd8iSKkmDAcVxlPMlwri11Jmw_YZNzqk0843KH8b5K5YjgYqOW8C8dIItlZ1RKmwZHs0y4uf9gofiiU8BsUQWGuJfHkSLHhNiOTE0wRFdjhN5l9J-m-hVTLengkXjnoHlC5BPTBkLNugH82QceTGV2tmw6EANEAXUJQ1rHB-ybx80SJer8KwQIiQF4fUB4epqloMmA0H1NlHkvO2IK2QHhF2RgOOQiJ6m5q6oSvV9FaBqRUMCVxyLD6A3_Ufh_kb3kno9syz4KyGYf_uUZEjph45auvmBN6-YAbcotu1_8TEFfWnRIUXl_Y92f5W0lJszWLbTM8m_XHcj2eIab3rUTlxpTGqhI4yVhYfui-APOp9oN7_7rH9I_Ld0yzOfEjDbKKGQ6025oeDRZoYB_JXRaXdyCquFgZYHFInARtOznyznj5i6o8u2q3OaIhT-Ame7wScyv6stUDyuYh1yGidDFYlM13vAbFSw_N5Ih4wTEvHacgtGc1hLzkdhxDwAX6OgJVnIIujQra0-nEpMpWxHzyVbZM5Y8AM-9YGbFEUUvrUAgJjeMBG411s8SpXV97UUU4pq-HuDoFBD2Et_mAz5hyG-2NUELLsVUfk=w525-h214-no" width="503" /></a></div>

Method Statement fo Equipment Internal Trays Installation Work

This Method Statement highlights the OWNER work sequence for the assembly and installation of trays, which are to be installed on the [Proj...

5:31 PM

Method Statement for Plumbing Fixtures Installation Work

<div style="text-align: justify;">
<span style="font-size: large;"><b>Pre-Installation Activities of  Plumbing Fixtures</b></span></div>
<div style="text-align: justify;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=CLL3PJUG9HN7Y" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="1024" data-original-width="768" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgV0nON5A-nyP7To7faJNknUJpyPlNka3v3x02CZkdaPd9SfAvfIrK77SqCoPBveZwyLW8QM0uQL9z8j6BmCFq7EIKO6BHwpuit8-34YaUdiVurvowdq8_z2ZjOeEGq9PiTnPK2CnFh14U/s400/P7%252C200.JPG" width="300" /></a></div>
<div style="text-align: justify;">
•  Ensure that all relevant documents have been approved by OWNER prior to installation, and that the latest revisions of IFC drawings, specifications including, approved procedures are disseminated to concerned personnel who will carry out the work.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Plumbing fixtures and equipment shall be installed in strict conformance with their manufacturer’s printed instruction & recommendations for installing products. Installation will not proceed unless these instructions and recommendations have been provided or unless approval has been given by OWNER.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Ensure that the walls and floors for wall-mounted and floor mounted fixtures had been completed prior to installation. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Check and verify the location and orientation of the fixtures on IFC isometrics / plan drawings. Establish good reference points for proper alignment.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
<b><span style="font-size: large;">Handling & Cleaning</span></b></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Clean project site and work areas daily, including common areas. Co-ordinate progress cleaning for joint-use areas where more than one installer has worked. Enforce requirements strictly. Dispose of materials lawfully.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Keep installed work clean. Clean installed surfaces according to written instructions of manufacturer. If specific cleaning materials are not recommended, use cleaning materials that are not hazardous to health or property and that will not damage exposed surfaces. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  During handling and installation, clean and protect construction in progress and adjoining materials already in place. Apply protective covering where required to ensure protection from damage or deterioration at project completion. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
<b><span style="font-size: large;">Installation Activities of  Plumbing Fixtures</span></b></div>
<div style="text-align: justify;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=CLL3PJUG9HN7Y" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" data-original-height="1024" data-original-width="768" height="400" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEihyphenhyphenyZrxu3XBuqHQs-7clixhx1RZpeO-EvU-RH6TeiiUYYngRbjXagENyKTaPW3UFFdpz9jpsz0FQCf0NtxBeM33O06WzBV5_jSgyy9-EcrCxY1c5ViGBWjjOaK98tnyYc5Ai-LefT3kdA/s400/IMG_0801.JPG" width="300" /></a></div>
<div style="text-align: justify;">
•  Fixtures should be handled properly to avoid damage during installation.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Fixtures shall be set level and in proper alignment with respect to walls and floors, and with fixtures equally spaced. Positioning of equipment & fixtures will be in accordance with project drawings and plumbing standard detail drawing nos. 20-DD-0002 to 0004.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Supplies lines shall be in proper alignment with fixtures and with each other.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Flush valves shall be installed in alignment with the fixtures, without vertical or horizontal offsets.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  All wall-mounted and floor mounted fixtures shall be grouted watertight where the fixtures are in contact with walls and floors.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Deck-mounted trim shall be caulked at the time of assembly, including fixture and casework-mounted. Self-rimming sinks installed in casework shall be caulked. One part mildew resistant white silicone caulking compound shall be used.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Upon completion of installation, submit request for inspection to OWNER for approval and acceptance.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
•  Upon completion and acceptance of inspection by OWNER clean and provide maintenance as frequently as necessary through the remainder of the construction period.</div>
<div style="text-align: justify;">
•  Even if the plumbing fixtures are inspected / accepted, the system shall not be used until sanitary drainage systems are ready. “ Not in service “ tag will be hooked on the fixture. </div>
<div style="text-align: justify;">
<br /></div>
<br />
<b>Would you like to take the full version, including its native file, of the Method Statement for Plumbing Fixtures Installation? Simply click the "<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=CLL3PJUG9HN7Y" target="_blank">DOWNLOAD Now</a>" below;</b><br />
<center>
<table border="1" style="height: 100%px; width: 500px;">
<tbody>
<tr>
<td><img alt="MsWord" src="https://goo.gl/BDuiD8" /><br />
<img alt="PDF" src="https://goo.gl/HMMBbo" />
</td>
<td><form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_top">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="CLL3PJUG9HN7Y">
<input type="image" src="https://goo.gl/58RR15" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!">
<img alt="" border="0" height="1" src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width="1">
</form>
</td>
</tr>
</tbody>
</table>
</center>
<br />
<br />
<center>
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="6258738437" style="display: block; text-align: center;"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://bccd7dov20t9nlfaogj6pmyftn.hop.clickbank.net/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="443" data-original-width="600" height="471" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhusbAJ9moHcMg_9eiwg7G1C5ROkN8ObHYOsGYXtcTIguxY95UhLoaxA7c_ynRmEpoDn7HTfxXupUjhh5Bkho8BGxEk1CoXQsAthjjn4NJl3BzKXwu2AMFHoIsxBO-Gta3ZQTqz-nEonHo/s640/Project+Management+%2526+Business+Templates.png" width="640" /></a></div>

Method Statement for Plumbing Fixtures Installation Work

Pre-Installation Activities of Plumbing Fixtures • Ensure that all relevant documents have been approved by OWNER prior to installa...

6:27 PM

Method Statement for Leak Testing of Underground FRP Surface Drain Line

<div style="text-align: justify;">
<span style="font-size: large;"><b>Pre-Testing Activities for Underground FRP Surface Drain Line</b></span></div>
<div style="text-align: justify;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=SC5B5LX9DL7FE" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1040" data-original-width="1600" height="416" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi6M8K-OT2fsXO0yYxOBGfsIZFU91r3tig5Pg8Xtty2pgpW7cbFsn31Ekv0HpfWdWDH-fUxGBA1nWMvIuPYwn20Zw0D6NYQBi8kgdAg0nhT-RPkgLt3K1YLt0GRCB_hnAraUh_CoxrcFwY/s640/Architecture+%2528241%2529.jpg" width="640" /></a></div>
<div style="text-align: justify;">
<br />
• Ensure that all relevant documents and procedures have been approved by OWNER prior to commencement of the work, and that the latest revisions of IFC drawings, specifications including approved procedures are disseminated to concerned personnel who will carry out the work.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Ensure that the required tools and equipment’s for leak testing such as plumber plug, hose clamp, clear hose, etc. is available.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Conduct site inspection to check and verify that the gradient, invert elevation and all joints are completely assembled and properly cured. Ensure also that the piping systems have been flushed clean of debris and sand or any foreign objects prior to leak testing. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Check and verify that the pipe have been buried to the minimum depth above the top of the pipe as per design requirement prior to water filling the system. Ensure that all joints have been left uncovered to allow inspection during leak testing.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Prior to leak testing, ensure that the pipe section to be tested have been plugged at the downstream end of the pipe (e.g. at the second manhole).</div>
<div style="text-align: justify;">
<br /></div>
<center>
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="6258738437" style="display: block; text-align: center;"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<div style="text-align: justify;">
<b><span style="font-size: large;">Testing Activities for Underground FRP Surface Drain Line</span></b></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Wherever possible, leak testing shall be carried out from manhole to manhole. Short branch drains connected to a main sewer between manholes shall be tested as one system with the main sewer. Long branches shall be tested separately from manholes and testing shall be conducted in accordance with OWNER Specification. Design and Construction of Sewers and SUBCON Standard Operating Instructions respectively. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• If the piping system is ready for testing, inject the test medium, potable water at the drain cleanout section of the piping system. The test shall start approximately one hour after filling the pipe with water. Water shall be added to maintain test head to cover water loss due to absorption and air pockets in certain piping configuration. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• To determine leakage on the system, insert a clear hose ¾” diameter (standpipe) into the nozzle of plumbers’ plug up to the highest level of the water inside the manhole or clean out. Tighten the hose clamp, then fill the hose with water extending up to at least 1.5 meter high above the crown of the pipe at the high end, but not more than 6 meter at the low end. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• The loss of water over a period of 30 minutes shall be measured by adding water from a measuring vessel at 10-minute intervals and noting the quantity required to maintain the original water level. For this test, the average quantity of water added shall not exceed 1.0 liter per hour per 100 meters linear distance per centimeter of nominal internal drain diameter. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Pipe exfiltration (leakage) that causes a drop in the test water level will be apparent by the change in the water level in the standpipe. Any leaks visible during water testing shall be repaired. Defective parts of the drain system shall be removed, replaced, and retested.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Below is the maximum allowable exfiltration (leakage):</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
</div>
<ul>
<li>Storm Sewers  - 0.00018 liters / mm diameter / m / h   </li>
</ul>
<br />
<div style="text-align: justify;">
                                    (0.0039 gallons / in diameter / ft / h)</div>
<div style="text-align: justify;">
  </div>
<div style="text-align: justify;">
</div>
<ul>
<li>Sanitary Sewers - 0.000037 liters / mm diameter / m / h </li>
</ul>
<br />
<div style="text-align: justify;">
                                      (0.0008 gallons / in diameter / ft / h)</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• To rectify the leaking joint or defective parts of the system, remove the plumber’s plug to drain the water out. Rectify immediately the affected leak joint. Cured it properly before leak testing will be carried out again.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• After rectifying the affected joint, fill the system again with potable water and repeat the above-mentioned method, then submit request for inspection to be conducted in accordance with OWNER project specification.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Once the inspection is completed and accepted by OWNER, drain the test medium. The same methodology shall be applied to the next succeeding loops until the whole piping system is fully tested.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Upon satisfactory completion of inspection and acceptance by OWNER, final backfilling commences and shall be carried out in accordance with OWNER Specification and SUBCON Standard Operating Instruction respectively.   </div>
<div style="text-align: justify;">
<br /></div>
<b>Would you like to take the full version, including its native file, of the Method Statement for Leak Testing of Underground FRP Surface Drain Line? Simply click the "<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=SC5B5LX9DL7FE" target="_blank">DOWNLOAD Now</a>" below;</b><br />
<b><br /></b>
<center>
<table border="1" style="height: 100%px; width: 500px;">
<tbody>
<tr>
<td><img alt="MsWord" src="https://lh3.googleusercontent.com/mpwJkHtLcBJQ0k7LI5ZwDb9Eq10UEoRxDA4vFTY7JHJ5aAy05rNfC9hk9Ee1W1aw8DcmXuULokauzr8xm6Lqp2KNCdSBLjOV17nTvEGfLElNpOA_CmPz45PRWy9WYPTqQK45fz3ax8nCXLU-Kuqm-IZuE0dt6YMgjDM0223R0Ny8iUfbY6Sl3re6sRVedU-gdF2fGHy329nnb19Jm23Ke-VEGWKxWROvE0LgkQxnr6hDr_67GWgMDijiuNs6WeCSvE1gKU3Vqo9g4RP4lo4sjUy4L3novntOhERsK_g4mg8UNiDc5kmSCsKlO3D2enkKlFmEbOsUAU-_An-LfnuhnE5Zgc6ZxNrz-Sx3RXJbW2fx4vi7zH2v05Q-yAGb_Y9uIGcArRuq3ASH3PCR4N5aidTPi-LS0FGd4uGUBoTI7wJ--KZ1VgzTVkyWtvn6iF8sMGKAydfmV5xC4sZu_uf88wSrPpLX6paTNihJs5IAMv73GLXUNYJYrwU0UuUE-qiImmLOS2HFPv5UTQWYndhoyoq2QZUrnH7JSqkRNJkxF6aXI8oZK28V9tF7RZNmIKD16uAu7I7NPSWi-QZg4kwo2G4XVFQj5DTbmqW48TQWLQtAC1q1X0bI3qhU_w2hziivstG5il-3e19X5B6BLKmQ-BtvLuB65EE=s128-no" /><br />
<img alt="PDF" src="https://lh3.googleusercontent.com/J4gip6NRrbFU5HpbheBsFGdAgXL7gd6GTSvJOuNeT90ki4bUgEPwkHB_Aeo9i3sNns5ZuSlqKX2XBYlpTWMZVrdpE96OiF9_AIqwj6xc7Al_N4Bjs2vqZcSlOxoxBs0hkI68p22sedb_ZCltM5-cz2vrkTOqhfusA1xReim3xPmhe7Xz4D1_hNsd1i7iZJA4oQGhOUdbr8VjYAuLvx5nocP_02goo0OIadd7bhwNWxbtoKNWYTaiAzSHA8gdcQKFV4oczp1hZzzMFbg6rneuNe6BIHJ2mf9fFHGxvtcSlMcIFt5AXWMFe7g-Ne6ryHYzp-PSB276_ym6ALMu4eq1E1QRNrlGfLvTLO0ZMZSrH6JqGB2ueyu4Fit_cYI-ut0OygH7-JP5nOD-5QfQ9Refgyxqcj-eftH3IDHTJEAAn94wOV--B32wtxi_nn0Js6B1oCnaUzE81cPAXQuZd96EO3pRQPVdnPBJF_qeBECCtshe-JgTw2YodMpH_v6a2kc3NmOmbzUZ23D8sRhQIKYZphieQrreq-QBLIXeEs-XBwctQywuDdYCnLGh2H590BQOkT2TSHPAzxUEbs8-HPD6KIBL-QTxa5v9Ny_8xKpui5-1TOzOwikjZwm7HxsZROISGZTdR3wGNobSiGGLnU5AEKfdRPzD9s8=s128-no" />
</td>
<td><form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_top">
<input name="cmd" type="hidden" value="_s-xclick" />
<input name="hosted_button_id" type="hidden" value="SC5B5LX9DL7FE" />
<input alt="PayPal - The safer, easier way to pay online!" border="0" name="submit" src="https://goo.gl/zfRjj2" type="image" />
<img alt="" border="0" height="1" src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width="1" />
</form>
</td>
</tr>
</tbody>
</table>
</center>
<br />
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>

<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="6258738437" style="display: block; text-align: center;"></ins><script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>

Method Statement for Leak Testing of Underground FRP Surface Drain Line

Pre-Testing Activities for Underground FRP Surface Drain Line • Ensure that all relevant documents and procedures have been approved...

5:36 PM

Method Statement/Procedure: Hard Copper Pipe & Potable Water Line

<div style="text-align: justify;">
This Method Statement describes solders and fluxes melting below 427°C (800°F), joint design, application temperature, testing, and soldering equipment. Hard solders <i>(high temperature silver solders) </i>which melt at approximately 1100°F are beyond the scope of this Method Statement.</div>
<div style="text-align: justify;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=N6D5JCSJRDZPA" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="432" data-original-width="648" height="426" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhFEPROSGzNgKR5PVNoBNYpk6b2H2ER80of5BqlXclAqlkvJjCihGLk7tiE5E-fpc8ppBeWHYM9RR78BARbU2JVtYAno6PEbi7Rlj-GlpXCODQDeGmEw4d3yAyfUHeb-AF2PS5ieASVh8c/s640/Industry+%25289%2529.jpg" width="640" /></a></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
<b>PRE-INSTALLATION ACTIVITIES:</b></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Ensure that all relevant documents have been approved by OWNER prior to installation, and that the latest revisions of IFC drawings, specifications including, approved procedures are disseminated to concerned personnel who will carry out the work.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Ensure that all-Hard Copper Pipe Plumbing Material to be transported from warehouse / laydown areas to the work area comply with the project specifications. Site handling and identification of all piping materials and components shall be in accordance with SUBCON Standard Operating Instructions. </div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Check and verify the location and orientation of piping to plant North on IFC isometrics / plan drawings. Establish good reference points for proper alignment.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
<b>JOINT DESIGN:</b></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• For maximum strength, a clearance of 0.075 mm (0.0031 in) between mating parts is recommended. This provides clearance for capillary action necessary to pull the soft solder into the joint and to keep oxides from reforming.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Except for potable (drinking) water systems, tin-lead solder (50/50) can be used for the majority of applications.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Lead-free with weight composition of 95.5% tin, 4.0% copper and 0.5% silver shall be use for jointing potable water copper pipe.</div>
<div style="text-align: justify;">
<br /></div>
<center>
<script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle"
     style="display:block; text-align:center;"
     data-ad-layout="in-article"
     data-ad-format="fluid"
     data-ad-client="ca-pub-8410740005525312"
     data-ad-slot="6258738437"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<div style="text-align: justify;">
<b>JOINTING METHOD</b></div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Pipe ends shall be cut square using a pipe cutter or hacksaw. All burrs shall be removed with a reamer or round file.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Ensure the end of the pipe to be soldered and the socket are thoroughly cleaned to bright metal by use of wire wool or sand paper.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Apply liberal amounts of flux to both the pipe end(s) and the socket(s) ensuring all the surfaces to be soldered are covered.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Insert the pipe end(s) into the socket ensuring full penetration.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Excessive heat will cause problems with quality of the joint (flux carbonises and solder will not adhere to the copper), therefore size of heating torch chosen and control of the heat are important.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Apply heat evenly all around the joint to both the socket and the pipe until the correct heat temperature is reached (approximately 380ºC) This is evident when the solder turns to liquid and becomes free flowing.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• Apply the solder at a position where the outside of the pipe meets the top edge of the socket. As soon as the solder starts to melt and flow freely remove the heat source and continue to apply the solder at the same position (do not move around the joint with the solder)</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
• The solder will flow into and around the joint by capillary action, as soon as a fine silver bead is evident all around the top of the socket stop applying the solder. Clean off any excess solder and flux with wire wool. Keep the pipe and joint firm until the joint has cooled down sufficiently. Under no circumstances shall the joint be cooled by quenching with water.</div>
<div style="text-align: justify;">
<br /></div>
<br />
Would you like to take the full version, including its native file (word & pdf), of this<b> Method Statement/Procedure: Hard Copper Pipe & Potable Water Line Template</b>? Simply click the "<a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=N6D5JCSJRDZPA" target="_blank">DOWNLOAD Now</a>" below;<br />
<br />
In this template it includes Responsibilities, Required Tools, Materials & Equipment, Cleanup, Inspection & Quality Records & Safety Precaus<br />
<br />
<center>
<table border="1" style="height: 100%px; width: 500px;">
<tbody>
<tr>
<td><img alt="MsWord" src="https://lh3.googleusercontent.com/mpwJkHtLcBJQ0k7LI5ZwDb9Eq10UEoRxDA4vFTY7JHJ5aAy05rNfC9hk9Ee1W1aw8DcmXuULokauzr8xm6Lqp2KNCdSBLjOV17nTvEGfLElNpOA_CmPz45PRWy9WYPTqQK45fz3ax8nCXLU-Kuqm-IZuE0dt6YMgjDM0223R0Ny8iUfbY6Sl3re6sRVedU-gdF2fGHy329nnb19Jm23Ke-VEGWKxWROvE0LgkQxnr6hDr_67GWgMDijiuNs6WeCSvE1gKU3Vqo9g4RP4lo4sjUy4L3novntOhERsK_g4mg8UNiDc5kmSCsKlO3D2enkKlFmEbOsUAU-_An-LfnuhnE5Zgc6ZxNrz-Sx3RXJbW2fx4vi7zH2v05Q-yAGb_Y9uIGcArRuq3ASH3PCR4N5aidTPi-LS0FGd4uGUBoTI7wJ--KZ1VgzTVkyWtvn6iF8sMGKAydfmV5xC4sZu_uf88wSrPpLX6paTNihJs5IAMv73GLXUNYJYrwU0UuUE-qiImmLOS2HFPv5UTQWYndhoyoq2QZUrnH7JSqkRNJkxF6aXI8oZK28V9tF7RZNmIKD16uAu7I7NPSWi-QZg4kwo2G4XVFQj5DTbmqW48TQWLQtAC1q1X0bI3qhU_w2hziivstG5il-3e19X5B6BLKmQ-BtvLuB65EE=s128-no" /><br />
<img alt="PDF" src="https://lh3.googleusercontent.com/J4gip6NRrbFU5HpbheBsFGdAgXL7gd6GTSvJOuNeT90ki4bUgEPwkHB_Aeo9i3sNns5ZuSlqKX2XBYlpTWMZVrdpE96OiF9_AIqwj6xc7Al_N4Bjs2vqZcSlOxoxBs0hkI68p22sedb_ZCltM5-cz2vrkTOqhfusA1xReim3xPmhe7Xz4D1_hNsd1i7iZJA4oQGhOUdbr8VjYAuLvx5nocP_02goo0OIadd7bhwNWxbtoKNWYTaiAzSHA8gdcQKFV4oczp1hZzzMFbg6rneuNe6BIHJ2mf9fFHGxvtcSlMcIFt5AXWMFe7g-Ne6ryHYzp-PSB276_ym6ALMu4eq1E1QRNrlGfLvTLO0ZMZSrH6JqGB2ueyu4Fit_cYI-ut0OygH7-JP5nOD-5QfQ9Refgyxqcj-eftH3IDHTJEAAn94wOV--B32wtxi_nn0Js6B1oCnaUzE81cPAXQuZd96EO3pRQPVdnPBJF_qeBECCtshe-JgTw2YodMpH_v6a2kc3NmOmbzUZ23D8sRhQIKYZphieQrreq-QBLIXeEs-XBwctQywuDdYCnLGh2H590BQOkT2TSHPAzxUEbs8-HPD6KIBL-QTxa5v9Ny_8xKpui5-1TOzOwikjZwm7HxsZROISGZTdR3wGNobSiGGLnU5AEKfdRPzD9s8=s128-no" />
</td>
<td><form action="https://www.paypal.com/cgi-bin/webscr" method="post" target="_top">
<input name="cmd" type="hidden" value="_s-xclick" />
<input name="hosted_button_id" type="hidden" value="N6D5JCSJRDZPA" />
<input alt="PayPal - The safer, easier way to pay online!" border="0" name="submit" src="https://lh3.googleusercontent.com/Vih3YvVmc6Uo2q1zVbGgop87pfMgpD8QizC3ab7O7sU-4rwGXkxXor0mxk8OGfPTm2Nk1RFxCyZMpxUCAxXYJij-HXmKGBtWH0j5RsL8es2Enk8QjIjwNEJyLalZnfNPzESL5Xy_J-7L6iTrqAfXvc7fdSSuezxvn3EIvnegOHY6xiost0f2F7d1OhPh5llxNf3Dkg4cnPDewDAt8hvJOVm5kJVyyHqZJhCI6uv4HXzgH5FbQs2SWNwXoDl-SUaFFNhOaa6Ftl1tVu4Wsm40vgUKCSNmSB44CeZfgPOzdW_eki9miTE6iDW8hNtugEWq1Qv___RiK6FOYEoUTWvKGzC5LcbGzfyLFWuU0D6SrSi3u4jGN7N4rsEbHoJopqBJ8D_lNkirUnSKw0Y5ofWz311xTROg2QB_k6CJUrsfhIAoZeaNVQfasZtCdk9W-0xtBuWFUNrKuxYzepWTSm2z_ZBPPE0E9_JRU_tA_Zb0Wh2HgXXtCEYpWiqhwqCJL-A_pEP8e4k9j4xVC6SIQ7KKctXukZYyEELO-c7BzQav5hjj-qnv_Xdla8DTHTG_CFgYWISHRQhh55qPhbcWyrHVRQc0SLWUKnGRdw3tBvWIGcqZbbvYJ8MBKM_XgS3BTBcShFpPbaCu8SKEJbXju1HKyCnhu-Q1l7I=w367-h304-no" type="image" />
<img alt="" border="0" height="1" src="https://www.paypalobjects.com/en_US/i/scr/pixel.gif" width="1" />
</form>
</td>
</tr>
</tbody>
</table>
</center>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://8dabdlq3oan8ul1ggbzfygt4fv.hop.clickbank.net/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1600" data-original-width="1258" height="450" src="https://lh3.googleusercontent.com/miGcCL7Fk4U6LOga1iJoXII9gjYNkPRQpsqhAoDV845AS-7gcYkVwLBCmknwd8iSKkmDAcVxlPMlwri11Jmw_YZNzqk0843KH8b5K5YjgYqOW8C8dIItlZ1RKmwZHs0y4uf9gofiiU8BsUQWGuJfHkSLHhNiOTE0wRFdjhN5l9J-m-hVTLengkXjnoHlC5BPTBkLNugH82QceTGV2tmw6EANEAXUJQ1rHB-ybx80SJer8KwQIiQF4fUB4epqloMmA0H1NlHkvO2IK2QHhF2RgOOQiJ6m5q6oSvV9FaBqRUMCVxyLD6A3_Ufh_kb3kno9syz4KyGYf_uUZEjph45auvmBN6-YAbcotu1_8TEFfWnRIUXl_Y92f5W0lJszWLbTM8m_XHcj2eIab3rUTlxpTGqhI4yVhYfui-APOp9oN7_7rH9I_Ld0yzOfEjDbKKGQ6025oeDRZoYB_JXRaXdyCquFgZYHFInARtOznyznj5i6o8u2q3OaIhT-Ame7wScyv6stUDyuYh1yGidDFYlM13vAbFSw_N5Ih4wTEvHacgtGc1hLzkdhxDwAX6OgJVnIIujQra0-nEpMpWxHzyVbZM5Y8AM-9YGbFEUUvrUAgJjeMBG411s8SpXV97UUU4pq-HuDoFBD2Et_mAz5hyG-2NUELLsVUfk=w525-h214-no" width="503" /></a></div>

Method Statement/Procedure: Hard Copper Pipe & Potable Water Line

This Method Statement describes solders and fluxes melting below 427°C (800°F), joint design, application temperature, testing, and solderi...

3:09 AM

Commencement of Construction Work

<b><span style="font-size: large;">Preparation of Work Guide</span></b><br />
<br />
<div style="text-align: justify;">
After Subcontractor has been selected and before work actually commences, the representative of the Subcontractor together with any sub-tier will be brought to the site for a conference, at which time, job rules, safety, quality control and schedules, etc. will be highlighted.</div>
<div style="text-align: justify;">
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhtrjdpJ_J6SK5wXRoBB82BLVwXNJN1c0AWFm3EHoZjPNZO_9qquiD0NeJ8R5X57_o4NtYX2TN7BDCWXCe7mVEfPTKYAsdOoBvEPIy71igcZf3G7fRJlA4of87tvJ8mKhAHHUHb4CpGIKw/s1600/Architecture+%252893%2529.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" data-original-height="1067" data-original-width="1600" height="266" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhtrjdpJ_J6SK5wXRoBB82BLVwXNJN1c0AWFm3EHoZjPNZO_9qquiD0NeJ8R5X57_o4NtYX2TN7BDCWXCe7mVEfPTKYAsdOoBvEPIy71igcZf3G7fRJlA4of87tvJ8mKhAHHUHb4CpGIKw/s400/Architecture+%252893%2529.jpg" width="400" /></a></div>
<div style="text-align: justify;">
Subcontractor Personnel who will be working on the job can be introduced to the Main Contractor at this time.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
After the subcontract has been issued, the Construction Manager with assistance of the Site Project Control Manager should prepare a Work guide for successful Subcontract. Essentially, it should set out the details which will be on the agenda for the Kick-off meeting, typical working rules, the names and telephone numbers of relevant Contractor's personnel, an indication of standard communication channels, and samples of Contractor's forms.</div>
<br />
<center>
<script async="" src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js"></script>
<ins class="adsbygoogle" data-ad-client="ca-pub-8410740005525312" data-ad-format="fluid" data-ad-layout="in-article" data-ad-slot="7321593616" style="display: block; text-align: center;"></ins>
<script>
     (adsbygoogle = window.adsbygoogle || []).push({});
</script>
</center>
<br />
<b><span style="font-size: large;">Kick-off Meeting</span></b><br />
<br />
<div style="text-align: justify;">
As soon as the Work Guide has been prepared, the Construction Manager shall arrange a Kick-off Meeting with the Subcontractor at the Main Contractors Site Office. The Main Contractor shall notify the Subcontractor its schedule, agenda and attendees at least one (1) week before the date of meeting. On the meeting agenda and its contents shall be presented by each party and discussed to set up effective mutual ground rules between the Main Contractor and the Subcontractor. The meeting will be proceeded in accordance with the following procedures, but not limited to :   </div>
<br />
<ul>
<li>A mutual commitment to a common goal (company spec., completion date including engineering date)</li>
<li>Recognition of responsibilities and obligations of each representative to his own entity and to each other that the Project must be executed with utmost urgency</li>
<li>Organization structure for each party (*)</li>
<li>Correspondence procedures</li>
<li>Contractor's furnished facilities at job site</li>
<li>Specifications and drawings (*)</li>
<li>Bill of Material and Specification</li>
<li>Labor relations (Subcontractors shall arrange labor for the work on it's own responsibility)</li>
<li>Construction schedule (*)</li>
<li>Construction layout</li>
<li>Construction equipment list</li>
<li>Overtime work procedure</li>
<li>Review of HSE program</li>
<li>Finance and accounting</li>
<li>Regular progress meeting and reports (*)</li>
<li>Quality control/inspections test plan (*)</li>
<li>Safety requirement</li>
</ul>
<br />
<div style="text-align: justify;">
The Owner, at its discretion, may attend the meeting. However, the Main contractor shall provide Owner with the minutes of meetings and copies of the above items (*) within 2 days after issuance.</div>
<br />
<b><span style="font-size: large;">Handover Certificate of Site for Commencement</span></b><br />
<br />
<div style="text-align: justify;">
The Main Contractor shall issue this certificate at the time of hand-over of the area where the works are to be performed and the temporary facilities erected.</div>
<div style="text-align: justify;">
<br /></div>
<div style="text-align: justify;">
The certificate shall be completed and signed by both parties. The completion date of the work covered by the Subcontractor shall run from the date of this certificate. </div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://bccd7dov20t9nlfaogj6pmyftn.hop.clickbank.net/" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="443" data-original-width="600" height="471" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhusbAJ9moHcMg_9eiwg7G1C5ROkN8ObHYOsGYXtcTIguxY95UhLoaxA7c_ynRmEpoDn7HTfxXupUjhh5Bkho8BGxEk1CoXQsAthjjn4NJl3BzKXwu2AMFHoIsxBO-Gta3ZQTqz-nEonHo/s640/Project+Management+%2526+Business+Templates.png" width="640" /></a></div>
<br />

Commencement of Construction Work

Preparation of Work Guide After Subcontractor has been selected and before work actually commences, the representative of the Subcontract...

3:54 PM

Method Statement for Total Traceability of Oxygen Piping Materials

A Worth While Walk at Changdeokgung (창덕궁) Palace

Method Statement fo Equipment Internal Trays Installation Work

Method Statement for Plumbing Fixtures Installation Work

Method Statement for Leak Testing of Underground FRP Surface Drain Line

Method Statement/Procedure: Hard Copper Pipe & Potable Water Line

Commencement of Construction Work

Popular Posts

Archive

Topics

Information

Customer Service

Prime Pages

Knowledge Power